Compatible Footprints

From Cartesian Co. Wiki
Jump to: navigation, search

The following page is a reference section for what component footprints are repeat-ably achievable and the substrates on which the successful tests have occurred. For instance, SOT23 (a 3 pin transistor package) can be printed onto FR4 and paper very easily but has been shown to not provide repeatable positive results on micro-fibres and is yet to be tested for compatibility on 3D printed ABS/PLA coated in PVA glue.

This page will be updated as further experiments are made, feel free to make suggestions for experiments in the forum

More information on the substrates can be found here

Footprint Reference Table

Image Print Image Footprint FR4 Paper MDF Kapton PVA Coated PLA PVA coated ABS Micro-fibres
2512.jpg
2512Print.png
2512 Tested & Works Tested & Works Tested & Works Tested & Works Tested & Works Tested & Works Tested & Works
1206.jpg
1206Print.png
1206 Tested & Works Tested & Works Tested & Works Tested & Works Tested & Works Tested & Works Tested & Works
0805.jpg
0805Print.png
0805 Tested & Works Tested & Works Tested & Works Tested & Works Tested & Works Tested & Works Tested & Works
0603.jpg
0603Print.png
0603 Tested & Works Tested & Works Untested Untested Untested Untested Untested
SOIC.jpg
SOICPrint.png
SOIC Tested & Works Tested & Works Tested & Works Tested & Works Untested Untested Tested & Works
Sot23-3.JPG
Sot23-3Print.png
SOT23-3 Tested & Works Tested & Works Untested Untested Untested Untested Untested
MiniUSB.jpg
MiniUSBPrint.png
Mini USB Connector Tested & Works Untested Untested Untested Untested Untested Untested