This article will run you through the process of aligning your printer.
Due to manufacturing tolerances each Argentum will have a slightly different alignment value. Alignment consists of Vertical offset and Horizontal components. The horizontal component is the distance between the same point on the two ink cartridges in the printers y axis. The vertical component is the distance between the two ink cartridges in the printers x axis. In the ARC software these components are called Vertical_offset and Horizontal_offset. Ideally the
The alignment menu can be found under Utilities > Processing Options. This is what it looks like:
When misalignment occurs a print in the direction of misalignment will appear thiner than it should be, or if the misalignment is bad enough it will not even print at all.
The easiest way we've found to determine the optimal values for Horizontal_offset and Vertical_offset is by printing an image and observing the direction of the misalignment. This can be done by printing an image that contains lines of varying width in both axis.
The alignment is stored in the print file on the SD card. This means you'll need to re-process the image each time you change the horizontal or vertical offset.