Starter Circuit

From Cartesian Co. Wiki
Revision as of 00:24, 29 August 2014 by Johns (Talk | contribs)

Jump to: navigation, search

How to make a starter circuit!

If you purchased a printer kit it will come with all the components needed to make a two of a simple circuit that lights up when you press a button.

It is very strongly advised that you read through the entirety of Cartridge Care before continuing with this tutorial.

Start by downloading our software from here.

Incase you're having trouble finding the kit this is what it looks like:

Demo circuit.jpg

The first thing we're going to do is check that there are no parts missing from the kit. You should have all the components shown in this photo:

Demo components.jpg

From top to bottom left to right these components are: Shipping decoys, buttons, LEDs resistors. You might be confused by the card like devices that are lab led dculex. Due to shipping regulations we are not able to ship lithium batteries unless they are contained inside an electronic device. This was the cheapest electronic device we could find and contains the CR1220 batteries we'll use in the circuit.

This is the circuit we'll be printing and assembling. Go ahead and save the image to your computer.

LED light.png

The ARC software generates print files from PNG images. The Argentum prints at 600DPI. If you're creating your own designs to print make sure they're exported as a PNG at 600DPI.

Open up the ARC software and click on the process file. Browse to the folder where LED light.PNG is saved to and click Open.

ARC open file.png

Now browse to the directory of your SD card and click Save. If you haven't got a SD reader build into your computer you can use the one provided. It's located in box No. 3 (Misc).

ARC save file.png